Tubing Changes IMPORTANT PLEASE READ

[KeithXtreme]

From: "luscombe68017" <luscombe68017@yahoo.com>
Date: Fri May 23, 2003 2:20 pm
Subject: Tubing Changes IMPORTANT PLEASE READ luscombe68017



John,

Yes, the cross bracing that joins the upper & lower chassis frames is
supposed to be all 3/4" HSS. As well, the bonnet tubes are also
supposed to be 3/4". On Dwg "A7", these tubes are numbered as "A9"
& "A10". I checked the plans I noticed that nowhere do I say that
these tubes are actually 3/4" HSS - good point. I'll make that
revision for the next batch of plans, thanks!

I'll post a note on my "Updates" page too to make other Sabretooth
buggy builders aware of this ommision in the plans.

Cheers,

Bruce
Badland Buggy