Thread: Hossfeld Bender
View Single Post
  #14  
Old 04-05-2021, 10:01 AM
Graham08's Avatar
Graham08 Graham08 is offline
Master Fabricator
 
Join Date: May 2006
Location: Iron Station, NC
Posts: 1,800
On a #2, the center pin is 1" and the other pins are 3/4". The inside of the swinging frame is 4-1/2" high, and the spacing between the 3/4" holes is 1-3/32". I'm not sure if some of the #2 tooling could possibly be sleeved down to 5/8" to work with your #1.
Reply With Quote